|
|
Automotive application – drive-by-wire:
자동차의 엑셀러레이터를 밟게되면 자석이 회전하게되고 회전한 각도만큼
HAL 805는 전압을 주어 엔진을 구동하게됩니다.
|
|
|
|
|
|
Automotive application – window
lifter:
Hall sensor는 드라이빙사프트의 속도와 방향을 감지하여 창문의
위치를 결정한다.
|
|
|
|
|
|
Automotive application – brake light
브레이크 패달을 밟으면 자석은 센서로부터 멀어지게되고, HAL 516스위치는
브레이크등을 점등시킨다.
|
|
|
|
|
|
Automotive application – RPM
measurement: On the backside of the differential Hall sensor HAL 320, a
strong magnet is located generating a magnetic field which is the same at both
Hall plates (back-bias application). The rotating ferromagnetic wheel modulates
this field and the HAL 320 responds to differences of the magnetic field at the
two Hall plates. Hence, the teeth and windows of the camshaft wheel are detected
and control signals for the motor management are generated. |
|
|
|
|
|
Industrial application – commutation of brushless DC
motors: Hall sensor는 모터의 로터위치를 검출한다. |
|
|
|
|
|
Industrial application – current measurement: An
electric current produces a magnetic field which can be guided by a magnetic
yoke to a linear Hall sensor; the output of the sensor is proportional to the
electric current. |
|
|
|
|
|
Industrial application – position measurement:그림과
같이 움직이는 자석을 이용하여,다양한 입력신호(거리,힘,압력등)는
자장을 변화시키게되며 HAL805는 이 신호를 아날로그 신호로 바꾸어준다. |
|
|
|
|
|
Industrial application – flow meter: 작은
자석을 회전부위에 부착하여,1회전마다 센서를 동작시킴으로 액체의
양을 측정할 수 있다. |
|
|
|
|
|
Industrial application – RPM measurement: 회전
검출 원리에 의하여, 자석은 센서 앞부분에 위치하며 회전하는 휠에의하여
출력이 검출된다.(vane position sensor) |